nfmr
fmrphoto

Standard features include :
  -  Nitrided armatures for long life.
  -  Fully encapsulated coils for durability.
  -  Fast-release brake armatures for accurate registration.
  -  Friction materials carefully chosen for torque and long life.
  -  Wiring that meets CSA standards.


The FMR clutch/brake module features a matched clutch and brake mounted on a bearing- supported through shaft. The housing of this foot-mounted unit is made from a light alloy. Simpler than the FMP module, the FMR module is an open design that allows for optimum heat dissipation.

This unit has a bearing-supported input hub that allows both ends of the shaft to be used independently as sources of output power. The unit is fully preassembled and preadjusted. All bearings are sealed. Critical alignment is not necessary during installation. The FMR module is suitable for parallel-shaft drive applications, and is easy to install.
   Drawing :
01279

Specification : (Dimensions in mm)

SIZE

 0.6 1.2 2.5 5 10 20
  Static Torque       kgm 0.55 1.1 2.2 4.5 9 17
  Exciting Voltage  DC-V 24 24 24 24 24 24
  Capacity (at 20 ºC)  W 11 15 20 25 35 45
  Max. Revolution  RPM 5000 5000 4500 4000 3000 2500

  Shaft Dia            dj6

 11 14 19 24 28 38

  Key (Shaft)      WxH 

4x4 5x5 5x5 7x7 7x7 10x8
Diameter A 80 90 110 140 175 200
B 52.5 65 80 105 135 155
C+0/-0.5 55 65 80 90 112 132
D 80 100 125 150 190 230
Ej6 38 45 55 64 75 90
F 33 37 47 52 62 74.5
G 10 10 12 15 15 18
H 13.5 13.5 15 20 24 28
I 6.5 6.5 9 11 11 14
J M4 M4 M6 M6 M6 M10
J1 3-M4 3-M4 4-M4 4-M4 6-M5 4-M6
K 27.5 27.5 32 35 42 45
Length L 181 217 270 330 399 504
M 90 105 130 160 185 230
N 75 90 110 135 160 200
P 65.5 78.5 98 121 149 187
Q 40.5 48.5 62 74 90 117
R 46.5 57 72 92 113 142
S 25 30 40 50 60 80
T 20 25 30 40 50 60
Weight                  kg 1.7 3 6.3 10.6 20 37